Posts

Avoiding invasive plant species, removing dead leaves and branches, and planting native plants can protect your landscape and home from wildfires. Photo: azboomer/Pixabay

Firefighting with Plants

/in , /by

Wildfire is a constant threat in Southern California. But there are ways you can protect your landscape and home using native, fire-resistant plants.

Plan your landscaping in three zones

Zone 1: Help your landscape resist fires by choosing smart designs and fire-resistant plants. The first zone should provide 35 feet of defensible space around structures and access areas. This maximizes fire prevention and allows fire crews to access your property if needed.

Zone 2: Your landscape should reduce the chances of airborne embers from catching fire. Thin vegetation for at least 65 additional feet in the second zone. That makes for a total of 100 feet of defensible space.

Zone 3: Many of San Diego County’s native, fire-resistant plants can survive and recover from infrequent fires. Some plants even use fire as a signal to begin growing.

However, when fires occur too frequently, survival is tough for even the most well-adapted plants. Invasive, non-native plant species make fires more frequent, longer in duration, and hotter. That’s why it’s important to remove invasive plants in fire-prone areas.

Crassula is a diverse and extensive genus of succulent plants, with about 350 species.

Crassula is a diverse and extensive genus of succulent plants, with about 350 species. Photo: Pixabay

Use fire-resistant plants

Some native plants with high salt or water content can themselves from airborne embers. For instance, agave, aloe, crassula, and other succulents store extra water in their fleshy leaves. These plants also usually have a low volatile oil content.

Five fire-resistant plant choices include:

  • Daylily hybrids
  • Coral Aloe
  • Indian Mallow
  • Bush Morning Glory
  • California Sycamore trees

Avoid plants that fuel wildfires

Messy, oily trees and shrubs, such as eucalyptus and junipers, fuel fires. They ignite quickly, burn hot and long, and release embers into the air. Because of those factors, they contribute to the spread of wildfire.

Preventative landscape maintenance includes regularly removing dry grass, thatch, brush, weeds, litter, waste, and dead and dying vegetation. Trees should be properly pruned. Similarly, shrubs should be thinned. Remove any dead branches or leaves. Leave root structures intact to avoid erosion. Dead leaves and branches are especially flammable on evergreen shrubs, so avoid planting these close to homes or structures.

This article was inspired by the 71-page Sustainable Landscapes Program guidebook available at SustainableLandscapesSD.org. The Water Authority and its partners also offer other great resources for landscaping upgrades, including free WaterSmart classes at WaterSmartSD.org.

Balancing Native Plants With A Fire-Resistant Garden

/in , , /by /Santa Cruz Sentinelby Jackie Pascoe

During long years of drought, homeowners were urged to replace thirsty lawns with drought-tolerant plants native to California, and plants from similar Mediterranean climate zones. Now the drought is officially over, but we have another worry: wildfires. Do drought-resistant plants burn more easily? Are we left with the wrong kind of gardens? The answer is: not really. Hydration makes plants are more fire-resistant, and drought tolerant plants, especially California natives, stay hydrated with less water and hold onto it longer than plants that originate in moister places. Plants to remove or avoid are those that shed bark or are fast growing. Also, plants that have a lot of wax, resin, oils, terpenes, or fats, such as chamise, rosemary, and sagebrush.

Full Story
Coral Aloe will protect your property from wildfire while it brightens your sustainable landscape. Photo: Don Graham/Flickr-Creative Commons license Firefighting plants

Call On These Five Firefighting Plants

/in , /by

Wildfire is a real and constant threat in San Diego County year-round, but particularly in the late summer and fall months. This is especially true in wildland interface areas where homes are right next to the backcountry. Landscape design, plant selection, and maintenance must be done in accordance with fire-safe guidelines. 

Wildfire is a real and consistent threat 

Plan your landscaping according to principles governing three different zones:  

Zone 1: Through smart design elements and plant selection, landscapes should resist ignition and provide 35 feet of actively maintained defensible space around structures and access areas. This maximizes fire prevention and allows access by crews to protect your property from fire, if necessary. 

Zone 2: Your landscape should reduce the chances of airborne embers from catching fire through a careful thinning of native vegetation for at least 65 additional feet — a total of 100 feet of defensible space.  

Zone 3: Many of San Diego County’s native plant communities including chaparral can survive and recover from infrequent wildfires. Some plants use fire as a signal to begin growth and start the germination process after a fire.  

When fires occur too frequently, the ability to survive is disrupted for even the most well-adapted plants. Invasive, non-native plant species have made fires more frequent, of longer duration, and hotter. It is critical to remove invasive plants in fire-prone areas.

Use plants that resist ignition 

Some native plants have the ability to prevent airborne plant embers. They have a high salt or water content and low volatile oil content in their leaves. For instance, agaves, aloes, crassulas, and other succulents store extra water in their fleshy leaves.  

Five firefighting plant choices include: 

  • Daylily hybrids 
  • Coral Aloe 
  • Indian Mallow
  • Bush Morning Glory 
  • California Sycamore trees 

Avoid plants that can fuel wildfires  

Messy, oily trees and shrubs, such as eucalyptus and junipers, do the opposite. They ignite quickly, burning hot and long, releasing embers into the air and contributing to the spread of wildfire. 

Preventative maintenance includes regularly removing dry grass, thatch, brush, weeds, litter, waste, and dead and dying vegetation. Trees should be properly pruned. Shrubs should be thinned, with dead branches and leaves routinely removed. Leave root structures intact to avoid erosion. Dead leaves and branches are especially flammable on evergreen shrubs and vines such as bougainvillea. Avoid planting these close to homes or other structures. 

This article was inspired by the 71-page Sustainable Landscapes Program guidebook available at SustainableLandscapesSD.org. The Water Authority and its partners also offer other great resources for landscaping upgrades, including free WaterSmart classes at WaterSmartSD.org.