Posts

Vallecitos Water District Helps San Marcos Coffee Farmer Brew Success

/in , , /by /Water News Network Mentioned: San Diego County Water Authority

San Diego County agriculture is well-known for citrus and avocados. Kyle Rosa is counting on coffee joining this list. Rosa, owner of Bluetail Coffee Grove, started growing coffee on a 2.5-acre farm in San Marcos last year. After 15 years in the finance industry, Rosa and his wife moved from San Francisco to start their new venture. The new farmer quickly turned to the Vallecitos Water District for help establishing smart water use and efficient systems to irrigate his six different specific types of coffee.

Full Story
Irrigation-Conservation Corner-drought-Water Conservation

Spray Versus Drip Irrigation: Which is Best for You?

/in , /by

Spray irrigation emits water in an overlapping pattern, while drip irrigation delivers water directly to the roots of plants. How do you decide which meets the needs of your landscaping?

The case for spray irrigation

Spray irrigation can be an efficient way to irrigate large landscapes with groundcover or uniform plant materials like lawns or meadows.

Spray systems apply water in gallons per minute (GPM), so if you know the application rate of each spray head, the distance between the heads, and the pressure of your system, it is relatively easy to figure out how much water is applied every time you run your irrigation.

Low volume spray heads apply water at about one-third the rate of conventional spray heads. Newer spray irrigation heads have improved spray with heavier droplets more resistant to wind. Landscaping with grade changes using spray heads should have check valves installed to prevent water flowing out of the lower point heads.

Challenges of spray irrigation include narrow areas surrounded by hardscape, or irregular patterns. Irregular patterns are particularly challenging, because spray irrigation requires head-to-head coverage to be efficient. Odd-shaped areas may be under or over watered. High-volume spray heads that emit water at a much higher rate than soil can absorb should be replaced.

The case for drip irrigation

Drip systems apply water in gallons per hour (GPH), so they often need to run for longer periods of time than spray systems. But the actual run time must always account for precipitation rate and runoff.

Installing subsurface systems (under at least two inches of mulch) is the most efficient way to irrigate nearly every type of garden area. Since the tubing is flexible, it can accommodate a variety of irregular shaped areas or rectangular areas when laid in a grid pattern, and in rings you can easily expand as trees or shrubs grow.

Challenges of drip irrigation include application of water too quickly for your soil to absorb. This needs to be considered when dripline grids are installed. Drip irrigation operates the most efficiently at low pressure (between 15 and 30 PSI). To achieve optimal performance, pressure regulation either at the valve or at the point of connection of the dripline to the buried lateral lines must be used. It is also essential to install some type of filtering system to keep the emitters from getting clogged.


This article was inspired by the 71-page Sustainable Landscapes Program guidebook available at SustainableLandscapesSD.org. The Water Authority and its partners also offer other great resources for landscaping upgrades, including free WaterSmart classes at WaterSmartSD.org.

 

Hydrozones-Conservation Corner-landscaping

Irrigation Efficiency Impacts Plant Health and Water Use

/in , /by

Irrigation systems have a lot of interconnected mechanical elements. They must be thoughtfully designed, installed and programmed. Once in place, irrigation systems must be maintained properly for optimal performance.

“Irrigation efficiency” is a way of describing how well your irrigation system is delivering water for the beneficial use of the plants in your landscaping.

Issues that adversely affect the performance of your irrigation system can greatly reduce its efficiency and cause you to use more water than needed. The issues fall in three major categories: site conditions in your landscaping, irrigation control, and the uniform distribution of water by your irrigation system.

Three ways to maximize irrigation impact

There are three ways to improve your irrigation system efficiency by upgrading and continuously maintaining it for maximum efficiency.

• Smart Irrigation Management
• State of the Art System Upgrades
• Matching Irrigation to Your Hydrozones

Intelligent irrigation begins by understanding that “setting and forgetting” your irrigation controller is a thing of the past. Even if you don’t have a “smart” irrigation controller to adjust your program for weather conditions, you should be more proactive in managing your watering, and more closely try to match your watering schedule with the actual water needs of your landscaping.

Upgrading your system with state-of-the-art components is a good investment and the single most significant thing you can do to save water.

Tips on professional help with your irrigation needs

You may decide to get professional help with your irrigation system. Look for designers or contractors qualified to provide these services. Credentials such as the Irrigation Association’s Certified Irrigation Designer designation can help assure your project will be successful. You can also ask if your contractor is a Qualified Water Efficient Landscaper (OWEL).


This article was inspired by the 71-page Sustainable Landscapes Program guidebook available at SustainableLandscapesSD.org. The Water Authority and its partners also offer other great resources for landscaping upgrades, including free WaterSmart classes at WaterSmartSD.org.